蜂窝陶瓷催化臭氧氧化处理饮用水中试

在北京市某净水厂进行了臭氧催化氧化处理滤后水的中试，对各种操作条件下蜂窝陶瓷催化臭氧氧化／颗粒活性炭过滤工艺的净水效果进行了考察。结果表明，与臭氧单独氧化相比，臭氧催化氧化反应器中有较高的溶解性臭氧浓度，对天然有机物（NOM）及总有机物（TOC）的去除效果较好，三氯甲烷生成潜能（CHCl3FP）较低。臭氧催化氧化的后续活性炭滤柱上的生物量较多，出水TOC、UV254及CHCl3FP值也均低于臭氧单独氧化的后续活性炭滤柱出水。     

浅谈锅炉管网系统中的异物堵塞问题

简述了堵塞对系统供热的影响,详细地阐述了如何通过检查找到不同情况、不同位置的堵塞异物,列举了确定堵塞位置的详细步骤,以准确地解决供热死角问题,从而保证供热系统正常运行,达到提高供热质量的目的。     

High-performance thin-layer hydrogel composite membranes for ultrafiltration of natural organic matter

Thin-layer hydrogel composite (TLHC) ultrafiltration (UF) membranes were synthesized by photo-grafting of either poly(ethylene glycol) methacrylate (PEGMA) or N,N-dimethyl-N-(2-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine (SPE) onto commercial polyethersulfone (PES) UF membranes. The performance of TLHC UF membranes was evaluated for natural organic matter (NOM) filtration and compared to commercial PES UF membranes. The fouling evaluation was done by investigation of membrane-solute interactions (adsorptive fouling) and membrane-solute-solute interactions (UF). The results suggest that the TLHC membranes convincingly displayed a higher adsorptive fouling resistance than unmodified PES UF membranes. In long-term stirred dead-end UF, a much lower fouling was observed for TLHC membranes than for commercial membranes with the same flux and rejection. Further, water flux recovery was also much higher. An analysis using an existing blocking model was performed in order to elucidate the effect of a polymer hydrogel layer on fouling mechanism as well as cake layer characteristics. The TLHC membranes synthesized by photo-grafting of PEGMA (40 g/L) and PEGMA with a low concentration of cross-linker monomer in the reaction mixture (ratio: 40/0.4 (g/L)/(g/L)) showed a much better performance than the other composite membranes. Those membranes could reduce the cake resistance on the membrane surface. This work has relevance for the design of high-performance UF membranes for applications in water treatment.     

基于层次分析法的可拓学理论在地下洞室岩体质量评价中的应用

基于可拓工程方法,在物元模型理论的基础上建立了洞室岩体质量评价的物元模型,提出采用层次分析法计算物元模型中各评价指标的权系数的方法。通过实际洞室岩体质量等级的关联度计算,对水布垭水电站地下厂房的围岩岩体质量进行了评价,得出与现场实际相符合的结论。研究结果表明:层次分析法用于确定洞室岩体质量评价指标的权系数是可行的,并且洞室岩体质量的可拓学评价能够较好地反映洞室岩体的质量等级,具有较好的适用性。     

Adsorption combined with ultrafiltration to remove organic matter from seawater

Organic fouling and biofouling are the major severe types of fouling of reverse osmosis (RO) membranes in seawater (SW) desalination. Low pressure membrane filtration such as ultrafiltration (UF) has been developed as a pre-treatment before reverse osmosis. However, UF alone may not be an effective enough pre-treatment because of the existence of low-molecular weight dissolved organic matter in seawater. Therefore, the objective of the present work is to study a hybrid process, powdered activated carbon (PAC) adsorption/UF, with real seawater and to evaluate its performance in terms of organic matter removal and membrane fouling. The effect of different PAC types and concentrations is evaluated. Stream-activated wood-based PAC addition increased marine organic matter removal by up to 70% in some conditions. Moreover, coupling PAC adsorption with UF decreased UF membrane fouling and the fouling occurring during short-term UF was totally reversible. It can be concluded that the hybrid PAC adsorption/UF process performed in crossflow filtration mode is a relevant pre-treatment process before RO desalination, allowing organic matter removal of 75% and showing no flux decline for short-term experiments.     

Is the association between temperature and mortality modified by age, gender and socio-economic status?

Background

A number of studies have examined the relationship between high ambient temperature and mortality. Recently, concern has arisen about whether this relationship is modified by socio-demographic factors. However, data for this type of study is relatively scarce in subtropical/tropical regions where people are well accustomed to warm temperatures.

Objective

To investigate whether the relationship between daily mean temperature and daily all-cause mortality is modified by age, gender and socio-economic status (SES) in Brisbane, Australia.

Methods

We obtained daily mean temperature and all-cause mortality data for Brisbane, Australia during 1996-2004. A generalised additive model was fitted to assess the percentage increase in all deaths with every one degree increment above the threshold temperature. Different age, gender and SES groups were included in the model as categorical variables and their modification effects were estimated separately.

Results

A total of 53,316 non-external deaths were included during the study period. There was a clear increasing trend in the harmful effect of high temperature on mortality with age. The effect estimate among women was more than 20 times that among men. We did not find an SES effect on the percent increase associated with temperature.

Conclusions

The effects of high temperature on all deaths were modified by age and gender but not by SES in Brisbane, Australia.     

加筋散粒体材料力学性能的大型三轴试验研究

着重研究了风积砂、加筋风积砂、砂砾、加筋砂砾等几种散粒体材料的强度和变形性能,分析了加筋对材料强度和应力-应变关系的影响。研究表明：通过三轴试验可以获得散粒体材料的强度参数c和!;同时,可以拟定材料本构关系的各主要参数。     

新型浮滤池处理微污染源水的研究

常规工艺对高藻、低浊微污染源水的处理效果较差,为了解决这个问题,将气浮与混凝、过滤技术相结合,开发出了一套新型浮滤池工艺（DAFF）,并以济南玉清湖水库水为处理对象进行中试,考察了对藻类及有机物的去除性能.试验结果表明：DAFF的处理效果明显优于常规工艺,对叶绿素a、高锰酸盐指数、UV254、浊度及氨氮的平均去除率分别为84.24%、59.76%、58.62%、85.2%、20.83%.该工艺结构紧凑、操作简便、占地面积小,适合新建的小水厂及老水厂的改造.     

Combined influence of membrane surface properties and feed water qualities on RO/NF mass transfer, a pilot study

The impact of membrane surface characteristics and NOM on membrane performance has been investigated for varying pretreatment and membranes in a field study. Surface charge, hydrophobicity and roughness varied significantly among the four membranes used in the study. The membranes were tested in parallel following two different pretreatment processes, an enhanced Zenon ultrafiltration process (ZN) and a compact CSF process (Superpulsator (SP)) prior to RO membrane treatment for a total of eight integrated membrane systems. All membrane systems were exposed to the similar temperature, recovery and flux as well as chemical dosage. The membrane feed water qualities were statistically equivalent following ZN pretreatment and SP pretreatment except for NOM and SUVA. Membrane surface characteristics, NOM and SUVA measurements were used to describe mass transfer in a low-pressure RO integrated membrane system. Solute and water mass transfer coefficients (MTCs) were investigated for dependence on membrane surface properties and NOM mass loading. Inorganic MTCs were accurately described by a Gaussian distribution curve. Water productivity decreased with NOM loading and increased with contact angle and roughness. The negative effects of NOM loading on productivity were reduced as the negative charge on the membrane surface increased. Inorganic MTCs were also correlated to surface hydrophobicity and surface roughness. The permeability change of identical membranes was related to NOM loading, hydrophobicity and roughness. Organic fouling as measured by water, organic and inorganic mass transfer was less for membranes with higher hydrophilicity and roughness.     

Dissolved organic matter, aluminium and iron interactions: precipitation induced by metal/carbon ratio, pH and competition

To better understand the precipitation behaviour of dissolved organic matter induced by interactions with metals, a systematic titration experiment was conducted mimicking the soil solution conditions in an acidic, sandy soil. The variables of interest included the type of metal species (Al, Fe), the redox state [Fe(II), Fe(III)], the pH (3.5, 4.0, 4.5), the metal to organic carbon (M/C) ratio and the competition between Al and Fe. Precipitation of DOM–Al appeared to be strongly correlated with M/C ratio and the pH. For Fe(II) only little precipitation occurred, while the strongest flocculation degree was found after addition of Fe(III). In contrast to Al, hardly any correlation between DOM–Fe precipitation and pH was observed. Both reduction and oxidation of Fe was found and exhibited a strong effect on the precipitated amounts of DOM and Fe. In competition, Al determined the precipitation behaviour at lower M/C ratios (<0.10), while at higher M/C ratios Fe determined the flocculation. Below a M/C ratio of 0.06 Al was the dominant metal in the precipitates, especially at lower pH levels, while the opposite trend was found at M/C ratios above 0.06. Overall, Fe(III) gave the strongest flocculation, although Al influenced the impact of Fe(III) interactions with DOM in relation to pH and M/C ratio.